[Az-Geocaching] Re-Gluing the rubber trim on Garmin Vista/Legends

[Brian Cluff]

bcasteel@cox.net wrote:
>This should be a simple repair that can be completed at home and I am wondering 
>if someone can make a recommendation on what brand of glue I should use to 
>re-secure the rubber trim to the plastic housing? I’m sure someone here has 
>already done this.

I don't have one of these units, but i've had resonable luck with 
similar problems by using rubber cement (Like you use on paper).
The trick is to put a thin layer of rubber cement on both sides of the 
surface and then let it dry without putting it together.  Once it's dry 
THEN stick the 2 surfaces together and you will have a much stronger 
seal than if you just put down a glob of it and pressed both sides together.
It's at least worth a try, you can easily rub it off if it doesn't work 
like you want.

Brian Cluff
Team Snaptek